Bac Water and the Calculator: How the Water Amount Changes Your Units
For research use only. For research purposes only. Not for human or animal use. Not medical advice: this tool only does the arithmetic and keeps your log. Nothing on this page tells you what to take, how much, how often or where.
My Peptide Shots is for research purposes only and is not for human or animal use. This guide covers the arithmetic of bacteriostatic water: what changes when more or less water is added to a vial, what stays the same, how the calculator at mypeptideshots.com/calculator picks an amount, and how to measure that water using the same syringe.
The calculator handles the arithmetic. This page explains the relationships behind the numbers so the results make sense when they appear on screen.
What the water changes, and what it does not
Adding water to a vial changes two things: the strength in mg per mL, and the number of syringe units needed for a shot. The formula is: strength (mg per mL) = vial size in mg ÷ bac water added in mL. Adding more water lowers the strength, so the same amount of peptide takes more units to draw. Adding less water raises the strength, so the same amount takes fewer units. Neither choice changes how much is in the vial.
As an example number—not a suggested amount—the calculator's default example uses a 5 mg vial with 2 mL of water added. That gives a strength of 2.5 mg per mL. If the water were changed to 1 mL, the strength would double; if changed to 3 mL, it would fall. The peptide in the vial is the same either way. Only the concentration, and therefore the units per shot, shifts.
How the calculator picks an amount of water
- It aims for a whole unit markThe calculator picks an amount of water between 0.5 mL and 3 mL that places the shot on a whole unit mark that is easy to read on the chosen syringe. This is a readability choice for the arithmetic, not a direction on what amount to use.
- A different amount can be typed insteadIf a different amount of water is typed in, the calculator works out the units again from that number. The result updates to match whatever is entered.
- It warns when results fall outside readable limitsThe calculator warns when the amount typed is more than the whole vial, when the answer is more than the syringe holds, when it is less than 1 unit, and when it falls between two lines on the syringe.
- It also shows the water amount in syringe unitsAs well as the mL figure, the calculator shows the water to add expressed as full syringes plus units, so the water itself can be measured with the same syringe.
Measuring the water with the same syringe
| Water to add | In units (U-100) | With a 100-unit syringe | With a 50-unit syringe |
|---|---|---|---|
| 0.5 mL | 50 units | 50 units | 1 full |
| 1 mL | 100 units | 1 full | 2 full |
| 1.5 mL | 150 units | 1 full plus 50 units | 3 full |
| 2 mL | 200 units | 2 full | 4 full |
| 2.5 mL | 250 units | 2 full plus 50 units | 5 full |
| 3 mL | 300 units | 3 full | 6 full |
Reading that table
- mL converts to units on a U-100 syringeOn a U-100 syringe, 100 units equals 1 mL, so 1 unit equals 0.01 mL and 10 units equals 0.1 mL. That relationship is fixed for any U-100 syringe regardless of its total size.
- A 50-unit syringe holds less, so more fills are neededA 100-unit syringe holds 1 mL and a 50-unit syringe holds 0.5 mL. To draw 2 mL of water, a 100-unit syringe needs 2 full draws; a 50-unit syringe needs 4 full draws. The unit marks mean the same volume on both; only the total they hold differs.
- The table shows full syringes plus any remaining unitsFor 1.5 mL of water, the table shows 1 full plus 50 units on a 100-unit syringe, and 3 full on a 50-unit syringe. The calculator presents the same breakdown on screen.
- The range in the table matches the calculatorThe table covers 0.5 mL to 3 mL, which is the same range the calculator works within when it picks an amount of water automatically.
Keeping the vial in the log
- A vial is saved with its size and the water addedIn the log, each open vial is saved with its size in mg and the amount of bac water added, typed in mL or in syringe units. The log needs an account; the calculator at mypeptideshots.com/calculator works without one.
- The log turns syringe units into mg or mcgOnce a vial is saved, the log uses the vial size and water amount to convert any syringe units logged into mg or mcg automatically.
- It shows the amount left in the vialFrom the shots logged against that vial, the log shows how much of the peptide remains. This is arithmetic from the person's own entries, nothing more.
Questions and answers
- Does the amount of water I add change how much peptide is in the vial?
- No. Adding more or less water does not change the amount of peptide in the vial. It changes the strength in mg per mL and therefore the number of syringe units needed for a shot. The peptide content stays the same.
- Why does the calculator pick the water amount for me?
- The calculator picks an amount between 0.5 mL and 3 mL that places the shot on a whole unit mark that is easy to read on the chosen syringe. It picks for arithmetic readability only. A different amount can be typed in at any time and the units are worked out again from that number.
- What is the difference between mg and mcg, and why does it matter here?
- 1 mg equals 1000 mcg, and mcg means microgram. An amount typed in the wrong unit is 1000 times off, which changes every number the calculator produces. The calculator asks the person to pick mg or mcg so the arithmetic uses the right scale.
- Is My Peptide Shots free to use?
- The log and the mix-ratio calculator are free to use today. There is no card to enter and the service holds no payment details. The Terms say a paid membership may come later, with at least 30 days' notice by email and in the app before any charge begins.
- Do I need an account to use the bac water calculator?
- No. The calculator at mypeptideshots.com/calculator works without an account, and what is typed into it is not saved or sent anywhere. An account is needed only to use the log, which saves vials, shots and weigh-ins.
The calculator at mypeptideshots.com/calculator is free to use today and works without an account. My Peptide Shots is for research purposes only and is not for human or animal use.
Work it out with your own numbers
The mix-ratio calculator asks three questions and shows every step. It needs no account, and what you type is not saved or sent anywhere.
Keep reading
- By vial size10 mg Vial: Bac Water and Syringe Units Chart
- By vial size5 mg Vial: Bac Water and Syringe Units Chart
- GuideInjection Site Rotation Tracker: Keeping the Record
- GuidePeptide Reconstitution Calculator: How the Math Works
- GuidePeptide Tracker App: What My Peptide Shots Records
- BrowseMix-ratio calculator