Skip to content

10 mg Vial: Bac Water, Strength and Syringe Units

For research use only. For research purposes only. Not for human or animal use. Not medical advice: this tool only does the arithmetic and keeps your log. Nothing on this page tells you what to take, how much, how often or where.

My Peptide Shots is for research purposes only and is not for human or animal use. This page shows the arithmetic for a 10 mg vial: how the amount of bac water added sets the strength once mixed, and how much each unit mark on a U-100 syringe then holds.

The page is about the vial size only. Nothing is said about what is in the vial, and no amount is suggested. All numbers come from the mix-ratio calculator at mypeptideshots.com/calculator, which is free to use today with no account needed.

How the numbers relate for a 10 mg vial

The strength once mixed is the vial size divided by the bac water added. For a 10 mg vial with 2 mL of bac water added, the formula gives 10 mg ÷ 2 mL = 5 mg per mL. On a U-100 syringe, 1 unit is 0.01 mL, so 1 unit at that strength holds 50 mcg, and 10 units hold 500 mcg. Those are example numbers read from the chart below; the same logic applies to every row.

Adding more bac water lowers the strength, so the same amount takes more units to draw. Adding less water raises the strength, so the same amount takes fewer units. The amount in the vial does not change regardless of how much water is added.

10 mg vial: water, strength and what a unit holds

Bac water addedStrength once mixed1 unit holds10 units hold
0.5 mL20 mg per mL200 mcg2 mg
1 mL10 mg per mL100 mcg1 mg
1.5 mLabout 6.67 mg per mLabout 66.67 mcgabout 666.67 mcg
2 mL5 mg per mL50 mcg500 mcg
2.5 mL4 mg per mL40 mcg400 mcg
3 mLabout 3.33 mg per mLabout 33.33 mcgabout 333.33 mcg

Reading the chart

  • Whole-number unit marksWith 0.5 mL, 1 mL, 2 mL or 2.5 mL of bac water, one unit holds a whole number of mcg: 200 mcg, 100 mcg, 50 mcg or 40 mcg. That makes the unit marks easier to read exactly on the syringe.
  • Non-whole-number unit marksWith 1.5 mL or 3 mL of bac water, one unit holds about 66.67 mcg or about 33.33 mcg. Those are repeating decimals, so reading the syringe at an exact mark is harder.
  • The '10 units hold' columnThe '10 units hold' column is simply ten times the '1 unit holds' column. For example, 1 unit holds 100 mcg at 1 mL of water, so 10 units hold 1 mg at the same water amount.
  • What a unit isOn a U-100 syringe, 100 units equals 1 mL, so 1 unit equals 0.01 mL and 10 units equal 0.1 mL. The unit marks are a volume; how much of the peptide one unit holds depends on the vial size and the water added.
  • Units are not a fixed amountThe same number of units drawn from two vials mixed with different amounts of water holds a different amount. The chart shows how each water choice changes what one unit mark contains for this 10 mg vial.

10 mg vial: what a full syringe holds

Bac water addedMixed vial in allA full 30-unit syringe holdsA full 50-unit syringe holdsA full 100-unit syringe holds
0.5 mL50 units6 mg10 mg (the whole vial)more than the vial holds
1 mL100 units3 mg5 mg10 mg (the whole vial)
1.5 mL150 units2 mgabout 3.33 mgabout 6.67 mg
2 mL200 units1.5 mg2.5 mg5 mg
2.5 mL250 units1.2 mg2 mg4 mg
3 mL300 units1 mgabout 1.67 mgabout 3.33 mg

Syringe sizes and a 10 mg vial

  • Unit marks mean the same volume on all three sizesA U-100 syringe comes in a 1 mL size holding 100 units, a 0.5 mL size holding 50 units and a 0.3 mL size holding 30 units. The unit marks represent the same volume on all three; only the total they can hold differs.
  • These are the most a syringe can hold, not amounts to useThe full-syringe table shows the maximum a syringe can hold at each water amount. These numbers are for reading the marks and understanding the limits of each syringe size, not amounts to use.
  • When a syringe is larger than the mixed vialWith 0.5 mL of bac water added, the mixed vial holds 50 units in all. A full 100-unit syringe holds more than the vial, so it cannot be filled from it. The table notes this directly for that row.
  • Reading one row acrossWith 2 mL of bac water added as an example row, the mixed vial holds 200 units in all. A full 30-unit syringe holds 1.5 mg, a full 50-unit syringe holds 2.5 mg, and a full 100-unit syringe holds 5 mg.

The calculator and the log

  • Three questions, two answersThe calculator at mypeptideshots.com/calculator asks how many mg the vial is, the amount per shot in mg or mcg, and which syringe. It answers with the bac water to add in mL and the units to draw for each shot.
  • Water picked for a whole unit markThe calculator picks an amount of water between 0.5 mL and 3 mL that puts the shot on a whole unit mark that is easy to read on the chosen syringe. A different amount of water can be typed instead, and the units are worked out again.
  • Saving a vial in the logThe log needs an account. Each open vial is saved with its size in mg and the bac water added in mL. From then on the log turns syringe units into mg or mcg and shows the amount left in the vial from the shots logged.
  • Calculator works without an accountThe mix-ratio calculator works without an account. What is typed into it is not saved or sent anywhere.

Questions and answers

Does the amount of bac water change how much is in the vial?
No. The amount in the vial stays the same regardless of how much water is added. More water lowers the strength, so the same amount takes more units to draw. Less water raises the strength, so the same amount takes fewer units.
Why does the chart show 'about' for some strengths?
With 1.5 mL or 3 mL of water, the strength and the amount one unit holds are repeating decimals. The chart shows them as 'about 6.67 mg per mL' or 'about 3.33 mg per mL' because the exact number does not end. Those water amounts make the unit marks harder to read exactly on the syringe.
What does the calculator do with the numbers typed?
It answers with the bac water to add in mL and the units to draw for each shot. It also shows the strength once mixed in mg per mL, how many shots the vial holds, and each step of how the answer was worked out. What is typed into it is not saved or sent anywhere.
Does it matter whether an amount is typed in mg or mcg?
Yes. 1 mg equals 1000 mcg, so an amount typed in the wrong unit is 1000 times off. The calculator makes the person pick mg or mcg for that reason, and every result should be checked before it is relied on.
Is My Peptide Shots free to use?
The log and the mix-ratio calculator are free to use today. There is no card to enter and the service holds no payment details. The Terms say a paid membership may come later, with at least 30 days' notice by email and in the app before any charge begins.

This page shows arithmetic for a 10 mg vial size only; nothing here is a suggestion about what to use or how to use it. Open the free calculator at mypeptideshots.com/calculator to work out the numbers for any vial size and syringe.

Work it out with your own numbers

The mix-ratio calculator asks three questions and shows every step. It needs no account, and what you type is not saved or sent anywhere.

Keep reading